acoustic: For the problem of a layered acoustic half space
isopsv: For the problem of a surface source on an elastic layered half space
isosh: For the problem of an SH line source in an elastic layered half space
isow: For the problem of a water layer over a layered elastic half space
timw: For the problem of a water layer over a layered transversly isotropic elastic half space.
The source code to these routines is provided as a resource. It is not intended as a seismic system that you can put together and run, but rather as a source of reliable seismic subroutines. If you have questions concerning this material please contact:
Ken Matson (281) 366-4370
|Source Code||1/8/04 14:49||1290240 bytes installed||tar gzip [194878 bytes]||Download|
Some documentation is contained within the following directory in datasets starting with doc. The most interesting one is likely to be
The routines are here as a resource of well-used seismic code. This is not intended as a seismic system that you can put together and run, but rather as a source of reliable seismic subroutines. I hope that these codes will be useful, but I am not very familiar with this package, and I am not likely to be very helpful if you have any questions.
Ray Abma (281) 366-4604
|The SPARC routines in a gzip'd tar file form||5/1/03 14:49||~ 55 Mbytes installed||tar gzip [7513025 bytes]||Download|
|The SPARC routines directory for individual routines||5/1/03 14:49||~ 55 Mbytes installed||Browse|
|The kmig3t Arco Time Migration Package||6/3/03 14:54||~ 1.5 Mbytes installed||Download|
Return to the FreeUSP home page